adding "forceload: drv/fct" to /etc/system has resolved the problem, now both
HBA are in target mode.
Thank you Allen.
o...@opensolaris:~# fcinfo hba-port
HBA Port WWN: 10000000c9328447
Port Mode: Target
Port ID: 0
OS Device Name: Not Applicable
Manufacturer: Emulex
Model: LP9002L
Firmware Version: 3.93a0 (C2D3.93A0)
FCode/BIOS Version: none
Serial Number: 0000C9328447
Driver Name: emlxs
Driver Version: 2.50i (2009.11.10.12.30)
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb
Current Speed: not established
Node WWN: 20000000c9328447
HBA Port WWN: 10000000c9328448
Port Mode: Target
Port ID: 0
OS Device Name: Not Applicable
Manufacturer: Emulex
Model: LP9002L
Firmware Version: 3.93a0 (C2D3.93A0)
FCode/BIOS Version: none
Serial Number: 0000C9328448
Driver Name: emlxs
Driver Version: 2.50i (2009.11.10.12.30)
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb
Current Speed: not established
Node WWN: 20000000c9328448
Message was edited by: dnd108
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
