On Fri, May 21, 2010 at 3:38 PM, Giovanni Tirloni <gtirl...@sysdroid.com> wrote: > Hello, > > We are migrating from a MegaRAID solution (mega_sas driver) to using > LSI 9211-4i HBAs (mpt_sas driver) and a common operation was to use > the MegaCli command to turn a LED on so the datacenter staff could > know which drive we wanted to replace. > > Is there anything like that for the mpt_sas driver ? The HBA is > connected to a SAS expander (LSI SASX36). The OS is OpenSolaris b134. > > Also, the device names changed from cXtXd0 to cXtXXXXXd0 which makes > it harder to know which physical slot we are talking about. Any way to > turn it back to the old naming convention or at least map the name to > a physical slot ?
After much searching around I found the sas2ircu command. http://www.supermicro.com/support/faqs/results.cfm?id=84 http://www.natecarlson.com/2010/05/07/review-supermicros-sc847a-4u-chassis-with-36-drive-bays/ -- Giovanni _______________________________________________ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
