I have a box running snv_134 and configured with iSCSI and FC targets. Server
has an LP10000DCe (2Gb PCIe) card. Clients are v210's running Solaris 10 and
all have LP10000DC cards (PCIx). There is an EMC DS32B2 (Brocade 3900) switch
connecting all the systems. The switch has no zones or other complex
configuration on it.
All of the iSCSI targets work fine, but I'm getting odd behavior on the FC side.
On the client I see the following:
bash-3.00# fcinfo remote-port -slp 10000000c969dd78
Remote Port WWN: 10000000c94222ec
Active FC4 Types: SCSI
SCSI Target: unknown
Node WWN: 20000000c94222ec
Link Error Statistics:
Link Failure Count: 5
Loss of Sync Count: 19
Loss of Signal Count: 6
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 365
Invalid CRC Count: 0
LUN: 0
Vendor:
Product:
OS Device Name: Unknown
It sees a LUN but there seem to be a bunch of errors and it can not determine
the disk type.
On the server I see the information I expect - 2 Gb connection, target mode,
etc.
stmfadm reports:
Target: wwn.10000000C94222EC
Operational Status: Online
Provider Name : emlxs0
Alias : emlxs0
Protocol : Fibre Channel
Sessions : 3
Target Group: FC-STORAGE
Member: wwn.10000000C94222ED
Member: wwn.10000000C94222EC
600144f0013ac30000004c630c120019
View Entry: 0
Host group : rac-cluster
Target group : FC-STORAGE
LUN : 0
Any ideas where I should be looking to track this problem down?
Thanks in advance-
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
