Hi,
I bought a PCIe x1 SATA controller card with SIL3531 chipset. The controller is
recognized by opensolaris but the hard disk (WD RE3) isn't displayed by 'format
-e'. It works when connected to the onboard SATA controller.
I tried
# modinfo
but wasn't able to spot the controller - not sure whether I was looking for the
right entry though, I didn't find an entry for the onboard controller either.
Below are outputs from scanpi and prtconf.
Any thoughts?
# uname -a
SunOS opensolaris 5.11 snv_134 i86pc i386 i86p
# /usr/X11/bin/scanpci
pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x1095 device 0x3531
Silicon Image, Inc. Sil 3531 [SATALink/SATARaid] Serial ATA Controller
# prtconf -pv
Node 0x00001b
assigned-addresses:
83020010.00000000.00000000.00000000.00000080.83020018.00000000.00000000.00000000.00002000.81020020.00000000.00000000.00000000.00000080
reg:
00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00000080.03020018.00000000.00000000.00000000.00002000.01020020.00000000.00000000.00000000.00000080
compatible: 'pciex1095,3531.1095.3531.1' +
'pciex1095,3531.1095.3531' + 'pciex1095,3531.1' + 'pciex1095,3531' +
'pciexclass,018000' + 'pciexclass,0180' + 'pci1095,3531.1095.3531.1' +
'pci1095,3531.1095.3531' + 'pci1095,3531' + 'pci1095,3531.1' + 'pci1095,3531' +
'pciclass,018000' + 'pciclass,0180'
model: 'Mass storage controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001095
subsystem-id: 00003531
unit-address: '0'
class-code: 00018000
revision-id: 00000001
vendor-id: 00001095
device-id: 00003531
name: 'pci1095,3531'
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
