0n Fri, Dec 03, 2010 at 10:15:08PM +1000, James C. McPherson wrote:
>On 3/12/10 05:42 PM, Wilkinson, Alex wrote:
>>
>> 0n Fri, Dec 03, 2010 at 10:17:18AM +1000, James C. McPherson wrote:
>>
>> >The distinguishing feature of the current J series JBODs (J4200,
>> >J4400 et al) is that they support SES diagnostic pagecode 0xa,
>> >Additional Element Status and set the Element Index Present (EIP)
>> >bit to 1 in the pagecode response. Enclosures which do not support
>> >this pagecode, or which do not have the Element Index Present (EIP)
>> >bit set to 1 in the pagecode response are not with libses since
>> >we cannot know which element in the enclosure the descriptor refers
>> >to.
>> >
>> >If your non-Sun JBOD adheres to the above requirement, then it
>> >really should "just work" with FMA.
>>
>> James, are you able to confirm whether the X4540 supports the
aforementioned ?
>>
>> Is there any magic Solaris command to verify this stuff ? Any examples ?
>
>Hi Alex,
>yes, the X4540 does provide this support. You can see
>this yourself (with OpenSolaris/Solaris 11 Express/[fork])
>by running
>
># /usr/lib/fm/fmd/fmtopo -dV
OK, thanks. Is there any way to manually light up an LED ? From this thread:
http://www.mail-archive.com/zfs-disc...@opensolaris.org/msg30462.html I
supposedly i could use: "cfgadm -x locator c0::dsk/c0t6d0* - but only on SPARC.
Is this possible on x86_64 on say an X4540 ?
#pfexec cfgadm -x locator c10::dsk/c10t0d0
cfgadm: Hardware specific failure: unavailable
-Alex
IMPORTANT: This email remains the property of the Department of Defence and is
subject to the jurisdiction of section 70 of the Crimes Act 1914. If you have
received this email in error, you are requested to contact the sender and
delete the email.
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
