Nice work Rajan
I recognise a couple of parts from other devices in there. The black pot rest looks like it comes from a paraffin stove and the round thing under it looks like.well sort of like a jelly mould made from stainless steel. I am glad to hear you have put in a grate because excessive charcoal production lowers efficiency. You should also get a cleaner burn in terms of emissions per kg of fuel put into the stove. I am glad to see also the pot skirt making a seal at the bottom edge. This adds to the draft. If you limit the air getting into the fuel hole (with a drop-down plate) you can get an increase in the flame temperature by limiting unneeded excess air. Have you tried it? When you add vertical height it usually pays to limit the air entrance cross section. Of course everyone will like the BA surface material! How much does it weigh? How much does it cost, say per 100? Regards Crispin +++++++ Dear All, Servals wood stove is shown at the following link. This is a low-smoke stove with a rated fire-power of 2 KW. http://servalsgroup.blogspot.in/2012/01/servals-modified-natural-draft-wood. html Best Regards, Rajan
_______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://www.bioenergylists.org/
