Roger, good to hear that you will be at ETHOS. 
Looking forward to discuss experiences, I will be in your session.
have you compared the Noflay stove to the LEGO stove that Moushine designed and 
that GIZ is promoting in Senegal and Burkina Faso? 

See you there, regards from San Franciso airport
Christa

Am 23.01.2013 um 21:10 schrieb Roger Samson <[email protected]>:

> 
> Dear Stovers,
>  
> We have been working in West Africa to find a new way forward to develop 
> affordable stoves that are cleaner burning and save more fuelwood. At the 
> ETHOS conference, Rebecca Chin and I will give a presentation on the new clay 
> brick stove REAP developed in 2012 and our efforts to install 2000 of the new 
> stoves last year.  
>  
> Since 2005 we have been working in West Africa to introduce the Mayon Turbo 
> and metal rocket stoves in rural communities. Our main problems have been 
> that these stoves were undersized for the large cooking pots, are much too 
> expensive (as Cecil poignantly highlighted) and, in the case of the metal 
> bucket rocket the stove was short-lived.
>  
> So we went back to the drawing board to develop a low-cost clay brick stove 
> with custom-made bricks to deal with the large pots.  Over the past year, 
> with funding from the Canadian Government, we have come up with the Noflay 
> stove or “no problem” stove. The stove is essentially made up of two 
> components: a central combustion chamber of fired bricks and a shroud (a 
> mortared brick wall custom-built to the pot size). In brief, the stove has 
> many of the design features of other large improved clay brick and metal 
> stoves (i.e. low excess air, preheated primary air, secondary air, good heat 
> transfer) but is much less expensive. The total installed cost of the stove 
> is about $10USD and it can hold a 34 cm pot typically used for a household of 
> 12 or more.  Compared to other advanced clay brick stoves some key reasons 
> for the low cost of the Noflay is its resource efficiency because of the 
> round shape (i.e. use of custom made bricks in both the firebox and shroud), 
> the limited use of kiln fired bricks and its focus on locally made bricks 
> which reduces transport costs and brick breakage.
>  
> Please find attached some of the photos of the stove being constructed.
>  
> regards
>  
> Roger Samson
> Executive Director
> REAP-Canada
> www.reap-canada.com
>  
>  
> <1. Noflay combustion chamber and shroud.JPG><2. Mason with Noflay.JPG><3. 
> cooking with the Noflay.JPG>_______________________________________________
> Stoves mailing list
> 
> to Send a Message to the list, use the email address
> [email protected]
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
> 
> for more Biomass Cooking Stoves,  News and Information see our web site:
> http://www.bioenergylists.org/
> 

_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org

for more Biomass Cooking Stoves,  News and Information see our web site:
http://www.bioenergylists.org/

Reply via email to