On 28 April 2017 at 14:12, Jan Mulder <[email protected]> wrote: > Let me first explain the use case. I (and some fellow cave explorers I dive > with) dive mCCR units (Kiss Classic specifically) in its most primitive > form. No attached divecomputer to the mCCR, but only some analog po2 devices > to fly the unit. This obviously results in no logging from po2 sensors. I > use a OSTC3, and most of my buddies some Shearwater divecomputer. As I am > (at this point), not aware how a Shearwater handles this use case, I > consider only an OSTC3 for now.
Hi Jan, Could you elaborate on your dive computer use and setpoints? I also dive my SF2 in manual mode completely but I have a fully eccr unit with a Shearwater controller. I "simply" use a setpoint of 0,7 as safe net and I fly the unit manually. How is your OSTC3 set? Do you need setpoints for deco calculation? My question is not really Subsurface related (ATM I don't get how a Subsurface mod will help) so, if you prefer, we could continue off list. Bye _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
