On 27 November, 2017 - Davide DB wrote: > On 17 November 2017 at 21:59, Davide DB <[email protected]> wrote: > > On 17 November 2017 at 19:10, Anton Lundin <[email protected]> wrote: > >> On 17 November, 2017 - Davide DB wrote: > >> > >>> Looking to one of my CCR dives (Petrel 2 controller) I realized that > >>> Po2 values reported by Subsurface at the 6 meter stop are way higher > >>> than those recorded and displayed by Shearwater Desktop. > >>> I'm 100 sure that Shearwater Desktop shows correct values because I > >>> perfectly remember O2 values I was seeing at 6 meter: I was never > >>> never never over 1.6 for all the time. > >>> According to Subsurface profile I was all the time at 6m over 1.6 with > >>> spikes at 1.75. > >>> Am I missing something? > >>> > >>> I chose a point in time (122' 50")and I attach three screenshots: > >>> > >>> Shearwater (which display only the AVG pO2) > >>> Subsurface with single pO2 sensor display > >>> Subsurface with AVG pO2 sensor display > >> > >> Could you dump the raw data from the device? > >> > >> It can be done using either dctool or using the predator protocol and > >> creating a device dump. > >> > >> > >> You could probably just send a log file of the download, I think I still > >> got the tool to replay a log file as a download. > >> > >> > >> Then I can take a look at the raw data to try to figure out what's going > >> on. > >> > >> > >> //Anton > > > > > > After depleting one battery here are. > > > > Dctool is a lucky process. 99% of the times I get errors like this: > > > > [73.192176] ERROR: Failed to receive the response packet. [in > > ../../source/src/shearwater_common.c:319 (shearwater_common_transfer)] > > [73.192715] ERROR: Failed to download the dive. [in > > ../../source/src/shearwater_petrel.c:266 > > (shearwater_petrel_device_foreach)] > > [73.193107] ERROR: Error downloading the dives. [in > > ../../source/examples/dctool_download.c:218 (download)] > > [73.193712] INFO: Write: size=9, data=FF0105002E902000C0 > > > > Raw file for the dive attached > > > > Thanks a lot > > > > -- > > Davide > > https://vimeo.com/bocio/videos > > Hi Anton, > Did you find the time to have a look at it? > > Thank you in advance
I haven't gotten around to it. Jef might be interested in looking at it to, so I'll ping him. //Anton -- Anton Lundin +46702-161604 _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
