On 17 November, 2017 - Davide DB wrote: > Looking to one of my CCR dives (Petrel 2 controller) I realized that > Po2 values reported by Subsurface at the 6 meter stop are way higher > than those recorded and displayed by Shearwater Desktop. > I'm 100 sure that Shearwater Desktop shows correct values because I > perfectly remember O2 values I was seeing at 6 meter: I was never > never never over 1.6 for all the time. > According to Subsurface profile I was all the time at 6m over 1.6 with > spikes at 1.75. > Am I missing something? > > I chose a point in time (122' 50")and I attach three screenshots: > > Shearwater (which display only the AVG pO2) > Subsurface with single pO2 sensor display > Subsurface with AVG pO2 sensor display
Could you dump the raw data from the device? It can be done using either dctool or using the predator protocol and creating a device dump. You could probably just send a log file of the download, I think I still got the tool to replay a log file as a download. Then I can take a look at the raw data to try to figure out what's going on. //Anton -- Anton Lundin +46702-161604 _______________________________________________ subsurface mailing list subsurface@subsurface-divelog.org http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface