On Wed, Aug 08, 2018 at 11:13:18AM -0700, Linus Torvalds wrote: > On Wed, Aug 8, 2018 at 9:32 AM Dirk Hohndel <[email protected]> wrote: > > > > Can you install the USB Device Info app from the app store, plug in the > > FTDI cable, and send me the device info that is shown (plus any > > descriptive information about the dive computer / download cable that you > > used)? > > Sadly, at least for the Suunto FTDI cases, I don't think you can tell > which dive computer it is. > > You can tell it's an official Suunto cable, because it will have a > product ID of 0xf680 (the vendor ID will be 0403 - FTDI). But all the > Suunto cables use the same device ID, afaik - even when they have > different connectors. > > And obviously, some people made their own cables instead of paying > Suunto $90 for the silly TFDI chip, so then they'd not going to > necessarily even have that product ID.
Since you have at least one of those cables, would you mind installing the app and sending me the output? Just so I know which information I can get from an official Suunto cable? > End result: I suspect you need to create the mapping based on user > input. Possibly by just going by "last time this device was plugged > in, they picked dive computer XYZ". That is a good point and something I need to add. But I'd also want to at least pre-select Suunto the first time someone plugs in a Suunto cable. /D _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
