Hi, 1 to 3 look OK. In 4 you should leave all entries you don't need empty, I don't know whether the double hyphen "--" does what you want. And yes you should extract both gdal archives to the same dir and you don't need a separate proj because it is included with the gdal mapserver zip. Concerning 6 there are some reports like https://social.msdn.microsoft.com/Forums/en-US/a0d0e17f-540a-43da-86dc-24c284dbf5f4/error-msb6006-clexe-exited-with-code-1073741515-with-vc-2013-ultimate-2010-installed-and?forum=vcgeneral which suggest that your Visual Studio installation may be broken.
The nightly snapshot sumo-msvc12Win32-svn.zip is a nightly build, so a readily compiled sumo which is built from the corresponding sources. Best regards, Michael Am 27.06.2016 um 21:28 schrieb Adama Fofana: > > Hi Michael > > > No, I am not using 0.26. I have the downloaded the sumo-svn from Nightly > Snapshots : > > http://sumo.dlr.de/daily/sumo-src-svn.zip (Sources) > > > Here are the steps: > > 1) I have unzip the file in a folder named 'sumo-svn' > > > 2) I have dowload the softwares : xerces-c-3.1.2, fox-1.6.50, gdal. > > > 3) I have execute the following > > * Execute <SUMO>\tools\build\pythonPropsMSVC.py > > 4) Then I have edited the config.props as follows: > <Project DefaultTargets="Build" ToolsVersion="4.0" > xmlns="http://schemas.microsoft.com/developer/msbuild/2003";> > <PropertyGroup Label="UserMacros"> > <XERCES>F:\MyDoc\Research\TrafficSim\Xerces\xerces-c-3.1.2</XERCES> > <PROJ_GDAL>F:\MyDoc\Research\TrafficSim\gdal</PROJ_GDAL> > <FOX16>F:\MyDoc\Research\TrafficSim\Fox\fox-1.6.50</FOX16> > <OSG>$(OSG)</OSG> > <FFMPEG>$(FFMPEG)</FFMPEG> > <PYTHON_LIB_DIR>--:\Python27\libs\python27.lib</PYTHON_LIB_DIR> > <PYTHON_DEBUG_LIB>--:\Python27\libs\python27.lib</PYTHON_DEBUG_LIB> > <PYTHON_INCLUDE_DIR>--:\Python27\include</PYTHON_INCLUDE_DIR> > > <XERCES_64>--:\MyDoc\Research\TrafficSim\Xerces\xerces-c-3.1.2_64</XERCES_64> > <PROJ_GDAL_64>--:\MyDoc\Research\TrafficSim\gdal2</PROJ_GDAL_64> > <FOX16_64>--:\MyDoc\Research\TrafficSim\Fox\fox-1.6.50_64</FOX16_64> > <OSG_64>$(OSG_64)</OSG_64> > <FFMPEG_64>$(FFMPEG_64)</FFMPEG_64> > <PYTHON_64_LIB_DIR>--:\Python27\libs</PYTHON_64_LIB_DIR> > <PYTHON_64_INCLUDE_DIR>--:\Python27\include</PYTHON_64_INCLUDE_DIR> > </PropertyGroup> > </Project> > > What I am not sure yet. I am having two files of gdal where one > contains: *bin* and *doc* folders, and the second one contains *include* > and *lib* folders. > Should I put all files together? > > Also, I have downloaded proj-4.9.2, is this files should be loaded > somewhere? > 5) I have set up in environment variables the path of: > sumo-svn, sumo-svn\bin, xerces-c-3.1.2\bin, fox-1.6.50\lib, gdal\bin. > > 6) I used Visual Studio Express C++ 2013 to load and build the file > *prj.sln * > * > * > Now, I am getting this following errors: > error MSB6006: "CL.exe" exited with code -1073741515. > error MSB6006: "CL.exe" exited with code -1073741515. > .... > ..... > error MSB6006: "CL.exe" exited with code -1073741515. C:\Program Files > (x86)\MSBuild\Microsoft.Cpp\v4.0\V120\Microsoft.CppCommon.targets > 3415 sumo-gui > > > I have also downloaded from *Nightly Snapshots* this > version: http://sumo.dlr.de/daily/sumo-msvc12Win32-svn.zip > where there is src folder ? how this can be used? > > > Best regards > > Adama > > > > > > > > > > > > ------------------------------------------------------------------------ > *From:* Michael Behrisch <[email protected]> > *Sent:* 25 June 2016 17:52:03 > *To:* Adama Fofana; [email protected] > *Subject:* Re: [sumo-devel] Error: Macro definition of snprintf > conflicts with standard library function > > Dear Adama, > I suppose you are not using 0.26 any longer but switched to the nightly > svn download which was a little unstable recently. Please try again with > a fresh download, the error you mention is probably fixed. > > Best regards, > Michael > > Am 25.06.2016 um 13:52 schrieb Adama Fofana: >> >> Dear Mickael >> >> >> Thanks for coming back to me. I finally used Visual Studio Express 2013 >> C++. I have built the file prj. I am getting some errors such as: >> >> Cannot open include file: 'GNELogo_Lock.cpp': No such file or directory >> >> >> When I opened the file GNEAditional.cpp, it indicates error in line: >> >> #include "GNELogo_Lock.cpp" >> #include "GNELogo_Empty.cpp" >> >> >> I I have checked the folder netedit from src folder, there are missing >> (.cpp and .h), as well as other file such as : GNECalibratorDialog.cpp, >> GNEConnection.cpp, GNEContainerStop.cpp, >> GENLogo_E1.cpp, GENLogo_E2.cpp, GENLogo_E3.cpp, etc >> >> >> I found this link: >> >> http://www.sumo.dlr.de/doxygen/dc/d2d/_g_n_e_logo___e1_8cpp_source.html >> >> >> Where the missing files are there. I tried to copy and re-create .cpp >> file and add in the netedit folder, I am still getting some errors. >> >> >> Is it right what I am doing? >> >> >> I have also checked on the forum, I found this link define by Pablo >> Alvarez Lopez: >> >> https://sourceforge.net/p/sumo/code/19970 >> >> >> I could not really figure out properly what need to do with it >> description, but it seems to be link to the problem I am facing with? >> >> >> Best regards >> >> >> Adama >> >> >> >> >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> *From:* Michael Behrisch <[email protected]> >> *Sent:* 24 June 2016 21:46:18 >> *To:* [email protected]; Adama Fofana >> *Subject:* Re: [sumo-devel] Error: Macro definition of snprintf >> conflicts with standard library function >> >> Dear Adama, >> try removing the snprintf define from src/windows_config.h. We are still >> compiling with Visual Studio 2013 which does not define snprintf, Visual >> Studio 2015 apparently has it. You might stumble upon a similar thing >> with vsnprintf in src/foreign/tcpip/socket.cpp. Please report back >> whether it helped. >> >> And yes after successfully building prj.sln you should find all >> necessary binaries in "bin". >> >> Best regards, >> Michael >> >> Am 23.06.2016 um 21:17 schrieb Adama Fofana: >>> Dear Michael >>> >>> >>> I just started using SUMO. >>> I have also download the following version >>> http://prdownloads.sourceforge.net/sumo/sumo-src-0.26.0.zip?download >> Download Simulation of Urban MObility from SourceForge.net >> <http://prdownloads.sourceforge.net/sumo/sumo-src-0.26.0.zip?download> >> prdownloads.sourceforge.net >> SUMO is a microscopic road traffic simulation. >> >> >> >>> >>> I follow this link to set up the compiler and libraries: >>> http://sumo.dlr.de/wiki/Installing/Windows_Build#Available_configurations >>> I download Xerces : >>> http://sourceforge.net/projects/sumo/files/dependencies/xerces-c-3.1.2vc12.zip/download >>> Fox: >>> http://sourceforge.net/projects/sumo/files/dependencies/fox-1.6.50vc12.zip/download >>> Gdal : >>> http://download.gisinternals.com/sdk/downloads/release-1800-gdal-1-11-3-mapserver-6-4-2.zip >> and >> http://download.gisinternals.com/sdk/downloads/release-1800-gdal-1-11-3-mapserver-6-4-2-libs.zip >>> >>> Then, I have modified <SUMO>\build\msvc10\config.props file as explained >>> http://sumo.dlr.de/wiki/Installing/Windows_Build#Available_configurations >>> >>> After that, I used Visual Studio 2015 C++ to build the following file: >>> <SUMO>\build\msvc10\prj.sln >>> >>> I am getting the following error one I build the file prj.sln: >>> >>> #error: Macro definition of snprintf conflicts with Standard Library >>> function >>> >>> Can you please explain what I should be expecting after building the file >>> prj.sln. >>> >>> Also, after execution of this command, I should see appear in the folder >>> 'bin' all file need to run a simulation? >>> >>> Best regards >>> >>> Adama >>> >>> >>> >>> >>> <http://prdownloads.sourceforge.net/sumo/sumo-src-0.26.0.zip?download> >>> ------------------------------------------------------------------------------ >>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San >>> Francisco, CA to explore cutting-edge tech and listen to tech luminaries >>> present their vision of the future. This family event has something for >>> everyone, including kids. Get more information and register today. >>> http://sdm.link/attshape >>> _______________________________________________ >>> sumo-devel mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/sumo-devel >>> >> > ------------------------------------------------------------------------------ Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San Francisco, CA to explore cutting-edge tech and listen to tech luminaries present their vision of the future. This family event has something for everyone, including kids. Get more information and register today. http://sdm.link/attshape _______________________________________________ sumo-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-devel
