sorry! my bad :-/ I forgot to reduce the randomTrip factor. If you use a scale of 0.1 I think you get a reasonable demand. The calibrator is on a three-lane road and with aspiredFlow of 2500veh/h, but it only reaches up to about 700 veh/h. The insertionCheck doesn't seem to have any impact on the results.
On Thu, Feb 24, 2022 at 10:54 PM Jakob Erdmann <[email protected]> wrote: > Your simulation is completely jammed and thus the calibrator cannot insert > anything. Or are you targeting mesosim? > > Am Do., 24. Feb. 2022 um 15:15 Uhr schrieb Sasan Amini <[email protected] > >: > >> I see. I set the insertionCheck="all" and didn't work. With "none" I can >> see more vehicles being inserted visually but haven't checked the outputs >> yet. >> Here is a small example (so far I have tried on three different networks >> and all had the same issue of not inserting vehicles). >> >> On Thu, Feb 24, 2022 at 2:31 PM Jakob Erdmann <[email protected]> >> wrote: >> >>> insertionCheck is an input attribute. By setting 'insertionCheck="none", >>> all insertion attempts succeed and this should be able to achieve the >>> desired insertion flow (and lots of collisions). By setting a different >>> list of checks you could narrow it down to the check that is most >>> influential in preventing insertion (and this would help me in diagnosing >>> the problem). >>> >>> If you can boil it down to a small test case with bad behavior (at >>> default insertionChecks), send all inputs to me. >>> >>> regards, >>> Jakob >>> >>> Am Mi., 23. Feb. 2022 um 18:22 Uhr schrieb Sasan Amini < >>> [email protected]>: >>> >>>> I am not sure if I can find the output of the attribute. I set it and >>>> looked at the log and tripinfo but couldn't find anything useful. But the >>>> calibrator is indeed inserting some vehicles which I see in both detector >>>> output and tripinfo. >>>> >>>> On Wed, Feb 23, 2022 at 4:28 PM Jakob Erdmann <[email protected]> >>>> wrote: >>>> >>>>> I'd guess that insertion fails for some reason. You could try the new >>>>> 'insertionCheck' feature to see which check it runs afoul of. >>>>> https://github.com/eclipse/sumo/issues/10114 >>>>> >>>>> Am Mi., 23. Feb. 2022 um 16:23 Uhr schrieb Sasan Amini < >>>>> [email protected]>: >>>>> >>>>>> Dear all, >>>>>> >>>>>> I was trying to test the calibrator for a network without any ODs >>>>>> following the instructions on: >>>>>> https://sumo.dlr.de/docs/Simulation/Calibrator.html. >>>>>> I have created an additional file in which I define an edge >>>>>> calibrator to increase the flow on that edge to 2500 veh/h (just to make >>>>>> sure I can make it work). But it seems that the calibrator doesn't add >>>>>> that >>>>>> many vehicles. I can see in the detector output that it adds only 20 >>>>>> vehs. >>>>>> Is there something that I am missing? >>>>>> >>>>>> Thanks for the help. >>>>>> Sasan >>>>>> >>>>>> _______________________________________________ >>>>>> sumo-user mailing list >>>>>> [email protected] >>>>>> To unsubscribe from this list, visit >>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>> >>>>> _______________________________________________ >>>>> sumo-user mailing list >>>>> [email protected] >>>>> To unsubscribe from this list, visit >>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>> >>>> _______________________________________________ >>>> sumo-user mailing list >>>> [email protected] >>>> To unsubscribe from this list, visit >>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>> >>> _______________________________________________ >>> sumo-user mailing list >>> [email protected] >>> To unsubscribe from this list, visit >>> https://www.eclipse.org/mailman/listinfo/sumo-user >>> >> _______________________________________________ >> sumo-user mailing list >> [email protected] >> To unsubscribe from this list, visit >> https://www.eclipse.org/mailman/listinfo/sumo-user >> > _______________________________________________ > sumo-user mailing list > [email protected] > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user >
_______________________________________________ sumo-user mailing list [email protected] To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
