Hi Andreas, lane changing is undergoing a major review right now but at the present stage there is no way to influence it (neither simulation parameters nor traci calls apart from the existing TraCI command changeLane).
Best regards, Michael 2013/10/22 Andreas Witsch <[email protected]>: > Hi all, > > I have a very simple scenario: A 500m long road with 2 lanes. At the end > of the road it shrinks to a new road with only a single lane. > Initially there are three cars: > Two simulator controlled cars on the left lane with an initial speed of > 0m/s. One starts at the beginning of the lane and another one after 300m. > Additionally there is a remote controlled car(with TraCI) at a distance > of 100m from the beginning of the right lane. Our car is trying to > change its lane to left, while accellerating with maximum accelleration. > > All cars use the following type: > <vType accel="5.0" decel="5.0" id="Car" length="5.0" minGap="0.5" > maxSpeed="50.0" sigma="0" /> > and the simulator is started with the parameters: --step-length 0.001 -S > --time-to-teleport -1. > > However, the remote controlled car does not change the lane! The car at > 300m does also not change to the right lane, like the car at 0m. > > When I relocate the 300m car e.g. at 80m, everything works perfect: Both > simulator controlled cars change to the right lane and the remote > controlled car to the left lane. > > Is the anything I can do to allow the cars to change the lane. I olso > toyed around with the car-following strategys and the impatience > value... no change. > > best regards > > Andreas Witsch > > > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
