Hello, the service rate is not modeled explicitly but results as a consequence of the car-following behavior. With the default model parameters it start somewhere around 2.5 seconds and then drops down to somewhere around 1.7 seconds (depending on road speed and vehicle speed distribution). You can measure this easily by setting up a simulated detector and look at the 'gap' values: http://sumo.dlr.de/wiki/Simulation/Output/Instantaneous_Induction_Loops_Detectors regards, Jakob
2017-03-05 16:50 GMT+01:00 Sneha Konnur <[email protected]>: > Hi, > > I would like to know how the service rate variation is modeled in sumo for > switch from red to green. Is it assumed constant or does it vary soon after > the switch and reach a constant value? > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
