Hello, there are currently no tutorials that deal with output and interpretation. You will have to plan on taking some time to figure these things out from the documentation. I recommend starting here: http://sumo.dlr.de/wiki/Simulation/Output#Aggregated_Traffic_Measures http://sumo.dlr.de/wiki/Simulation/Output/Lane-_or_Edge-based_Traffic_Measures
regards, Jakob 2017-07-17 10:24 GMT+02:00 Imen Ben Arbi via sumo-user < [email protected]>: > Dear SUMO users, > > First of all I want to thank you for taking the time to read my request. I > am working now about a small project with SUMO , my mission is to simulate > different scenarios such as (one way, two ways, one intersections, two > intersections and urban road network with different values of traffic > lights, different number of vehicles and other parameters ....) > and finally I have to generate results such as (length of queues, rate of > flow in each intersection....) > I have already read the sumo docs, but I want to ask you some questions > since I am pressed by the time, my issue is how I can generate those > different results and parameters from the sumo simulation and then > interpret them. I will be very grateful if you can help me in this point > with some tests or examples. > > Best regards, > Imen Ben Arbi > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
