"Paul Matthews" <[EMAIL PROTECTED]> wrote: > I am using some wireless bridges > (Pheenet WAP 11) so that the ray thinks it is connected to a normal > wired hub. So far I am only seeing the IP address on boot up. I > guess the tftp boot forwarding is the issue but on the bridges in > question there appears to be no option to enable bootp.
If these are bridges then they should just blindly forward all frames. Bridges don't know or care about BOOTP or TFTP or anything else above the link layer. If the Sun Ray boots when it's plugged into the wire at the far (server) end of the wireless link then it should boot when it's plugged into the bridge. (I'm assuming that the Sun Ray traffic isn't being blocked by some sort of access control or filtering.) What does the Sun Ray show in the bottom right corner of its on-screen startup icon, and what does a 'snoop' capture of the traffic on the server's interface to this subnet show? OttoM. __ ottomeister Disclaimer: These are my opinions. I do not speak for my employer. -- ___________________________________________________ Play 100s of games for FREE! http://games.mail.com/ _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
