I don't see any reason why it won't work(redirect) when used with
comport:1=/tmp/SUNWut/units/IEEE802.00144f2179c7/dev/term/<node name a/b>
Thanks
P.S.M.Swamiji
Note:These are my personal opinions , nothing to do with my employer
Craig Bender wrote:
One more item.
If your program does not programatically set the baud/parity/stop
bits, etc you will need to set your device to 9600, 8, N, 1 to match
the defaults of utseriald.
An example would be a serial printer that defaults from the factory at
19200/8/N/1. Since you can't configure export comports via the
control panel ports util, you have to make the printer match the
default of utseriald.
If you ever have to do this for an Epson Dot Matrix printer, I feel
for you.
Craig Bender wrote:
Hi Joe,
The correct command would be
comport:com1=/tmp/SUNWut/units/IEEE802.00144f2179c7/dev/term/b
Now a couple of things:
I mention using using /dev/term/b because /dev/term/a is not a full
fledged port.
You application should list serial ports and your should see
\\tslcient\com1
If your application does not see those ports list you can do the
following:
net use com5: \\tsclient\com1
Now you could use com1 or com2 in the net use statement, but those
are most likely physically on your computer. In order to use those
via RDP you would have to disable them in the bios.
Hope that helps.
Joe Toth wrote:
Greetings,
I am working on a pilot deployment of SunRay's and I am having some
trouble getting the COM Ports on a SunRay 170 to map over to an RDP
Session using the SunRay Windows Connector. I have a Topaz Systems
electronic signature pad connected to the SR that I am trying to use
inside of Windows.
The connector starts up without error but the COM port is not
available in Windows.
Here is the command that I am using to start the SunRay connector
and connect it to the Windows Host, which in this case is a Windows
XP Pro machine.
uttsc -m -r
comport:1=/tmp/SUNWut/units/IEEE802.00144f2179c7/dev/term/a
192.168.0.XXX
I was hoping that someone could take a look at the command and let
me know if the Syntax is correct to allow this port to be mapped
into Windows XP. I am new to using the SunRay's and I can't seem to
find any examples of the proper usage of this command, as Sun seems
to refer to the COM ports as A and B where in Windows I assume that
they should be showing up as COM 1 and 2. I'm guessing that
something in the COM name or device path is probably incorrect so I
hope that someone might be able to provide an example of what the
proper Syntax to map COM1 on a SunRay 170 as well as using a
USB/Serial Adapter on a SunRay 2 to map COM1 would look like.
Thanks in advance
Joe Toth
Tier 5 Solutions Group
E: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
P: (866) 661-6736
F: (866)-888-4613
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
