Hi Craig,
I'm assuming that you've created the same group sig and that utreplica
has been ran on both the primary (letting it know about the
secondaries) and the secondaries (letting it know about the primaries
and also that a restart of the fog was done.
Yes
Where any errors noted during this procedure?
No
what does utgstatus show and utreplica -l show (from both the primary
and the secondaries in question)
On the primary SRSS server:
(bobcat-2)# ./utgstatus
host flags interface flags interface flags
10.2.12.0/24 192.168.128.0/24
----------- ------------------- -------------------
bobcat-2 TN 10.2.12.5 UA- 192.168.128.1 UAM
bobcat-3 TN 10.2.12.8 UA-
bobcat-4 TN 10.2.12.3 UA-
bobcat-1 TN 10.2.12.4 UA- 192.168.128.2 UAM
(bobcat-2)# ./utreplica -l
Sun Ray server 3.1
Administration Failover Configuration
bobcat-2 is a primary server for:
bobcat-1
bobcat-4
bobcat-3
(bobcat-2)#
---------------------------------------------------------
On the secondary SRSS server:
(bobcat-1)# ./utgstatus
host flags interface flags interface flags
10.2.12.0/24 192.168.128.0/24
----------- ------------------- -------------------
bobcat-1 TN 10.2.12.4 UA- 192.168.128.2 UAM
bobcat-2 TN 10.2.12.5 -A- 192.168.128.1 -AM
bobcat-4 TN 10.2.12.3 -A-
bobcat-3 TN 10.2.12.8 UA-
(bobcat-1)# ./utreplica -l
Sun Ray server 3.1
Administration Failover Configuration
bobcat-1 is a secondary server
The primary server is: bobcat-2
(bobcat-1)#
mike(moose)[4]$
---------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
