Hello,
I hope someone can help me with a DTU connection problem I'm
having. I configured SRSS to have non-card users in CAM mode and card
users to be non-CAM. I wrote a wrapper script that looks up the "Other
Info" field for the DTU and based on what's in there, connect to the
listed IP with either uttsc or vncviewer. The script portion seems to
work fine as long as only one DTU is connected, however, when a second
DTU tries to connect it does nothing but cycle. I can terminate the
session on the first DTU which allows the second DTU to connect and the
wrapper does it's thing. The only problem at that point is that the
first DTU now does nothing but cycle. It acts like only 1 DTU can
connect using CAM at a time.
My config is as follows:
SRSS 3.1_21 (latest from Sun as of May 6th)
SRWC 1.1_15 (also latest from Sun)
DTUs reside on subnet A with MS DHCP server configured with option 49
that point to the SRS.
SRS (Sol 10 Sparc) resides on subnet B with all other DHCP info but
doesn't serve IP addresses.
Other Info in DTU config is set to rdp:<IP_address> or vnc:<IP_address>
depending on where it needs to go.
I tried looking at the messages file in /var/opt/SUNWut/log and this is
what I see when the second DTU cycles:
May 18 15:43:50 c3duadm1 utauthd: [ID 118799 user.info] Worker6 NOTICE:
MTU = 1500
May 18 15:43:50 c3duadm1 utauthd: [ID 191351 user.info] Worker6 NOTICE:
SESSION_OK pseudo.0003ba10d876
May 18 15:43:54 c3duadm1 utauthd: [ID 794400 user.info] SessionManager0
NOTICE: EMPTY: ACTIVE session
May 18 15:43:54 c3duadm1 utauthd: [ID 484224 user.info] Terminator
NOTICE: DISCONNECT IEEE802.0003ba10d876, pseudo.0003ba10d876 session
terminated
May 18 15:43:54 c3duadm1 utauthd: [ID 226395 user.info] SessionManager0
NOTICE: TERMINATE: ACTIVE session
May 18 15:43:54 c3duadm1 utauthd: [ID 860473 user.info] Terminator
NOTICE: DESTROY pseudo.0003ba10d876 lifetime=4939
May 18 15:43:55 c3duadm1 utauthd: [ID 642468 user.info] Worker1 NOTICE:
whichServer pseudo.0003ba10d876:
May 18 15:43:55 c3duadm1 utauthd: [ID 990960 user.info] Worker1 NOTICE:
CLAIMED by StartSession.m2 NAME: pseudo.0003ba10d876 PARAMETERS:
{terminalIPA=172.16.66.151, type=pseudo,
fw=3.1_32,REV=2005.08.24.08.55,Boot:1.5; 2001.02.06-17:08:15-PST,
state=disconnected, cause=insert, doamgh=true, barrierLevel=310,
rawId=0003ba10d876, MTU=1500, tokenSeq=1, firstServer=0a202067,
namespace=IEEE802, id=0003ba10d876,
clientRand=qiflcm2nxPKkZSIC1ts2yVRy1W7oPgShmQPYVTxIn2W, realIP=ac104297,
startRes=1280x1024, useReal=true, event=insert, pn=49305,
sn=0003ba10d876, rawType=pseudo, hw=SunRayP2, initState=0, _=1}
May 18 15:43:55 c3duadm1 utauthd: [ID 357960 user.info] Worker1 NOTICE:
CONNECT IEEE802.0003ba10d876, pseudo.0003ba10d876, all connections
allowed.
Any and all suggestions would be greatly appreciated.
Thanks in advance,
Chris
-----------------------------------------
***Note:The information contained in this message may be privileged
and confidential and protected from disclosure. If the reader of
this message is not the intended recipient, or an employee or agent
responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have
received this communication in error, please notify the Sender
immediately by replying to the message and deleting it from your
computer. Thank you. Premier Inc. _______________________________________________
SunRay-Users mailing list
[email protected]
http://node1.filibeto.org/mailman/listinfo/sunray-users
