Unfortunately, AMGH is also not supported for mutlihead groups, which we use extensively. (We don't use Kiosk, though - so it looks like we have pretty much complimentary non-supported configurations! :-)
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lewick, Taylor Sent: Wednesday, September 05, 2007 8:29 AM To: SunRay-Users mailing list Subject: RE: [SunRay-Users] Multicast problems If I understand it correctly, SUN uses AMGH, and there is a good blog of an "AMGH How To Guide" here... http://blogs.sun.com/bobd/ My problem is I'd like to setup failover groups across the WAN. But according to our network guys, we don't route mutlicast across the WAN. And AMGH still says its not currently supported for CAM/Kiosk mode. It can be done, but requires a little customization. Myself, I have no problem trying to do the customization, but as the only onsite Unix Admin, and due to corporate requirements, I'd really rather not start down the path of running in an "unsupported" configuration. So I'm a bit stuck as to how I should go about implementing failover groups across the WAN. Any ideas? Thanks, Taylor _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
