Hello
Try,
# /opt/SUNWut/sbin/utreader -a *0800204c121c...this is the MAC Address
of he sunray that will be assigned to be token reader
*
To Get a Token ID From a Token Reader
In releases prior to SRSS 3, access to the token card reader was limited
to the server
to which it was connected; the utuser command had to be invoked from that
server. Beginning with SRSS 3.1, however, you can access the token card
reader by
invoking utuser -r from any server in the relevant failover group. The
procedure
otherwise remains as it was in earlier releases.
? Type the following command:
# /opt/SUNWut/sbin/utuser -r Token Reader
where Token Reader is the MAC address of the DTU containing the smart
card whose
ID you want to read. Insert the smart card into the DTU and run the utuser
command. This command queries the DTU for the smart card token's ID and, if
successful, displays it. For example:
# /opt/SUNWut/sbin/utuser -r 08002086e18f
Insert token into token reader '08002086e18f' and press return.
Read token ID 'mondex.9998007668077709'
Hope help.
Regards
Paola Rubio
Einar Gonzalez escribió:
Hello,
I would like to know how to set up the SunRay2 to be Smartcard Reader for the
Sun Ray server software 4.0, because the procedure I have found is for 3.1 and
the drivers sunrayCTdriver.jar is not in the /opt/SUNWut/lib/
Regards,
Einar.
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
