Hi, Locally you could have DHCP manage your settings, so that you can enter your office details when needed; then reset to pick up DHCP again...
Another idea which I've asked Sun for feedback on, is the ability to store configuration data on the smartcard. My original idea was to allow for true global hot-desking i.e. if your SunRay Server Details + VPN config were on the smartcard then you could go to any internet connected SunRay and dial home ;)... however no word at this time.... oh well.. - AG -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Jones Sent: 19 July 2008 17:47 To: SunRay-Users mailing list Subject: [SunRay-Users] Sun Ray 270 Question Hi everyone, I have a Sun Ray 270 in my home office that I use via a VPN to access an SR server in another city. I used the 270's GUI interface to configure the network settings and it works great. However, I also have an SR server running on my local network. I would like to be able to easily switch the 270 between the local and remote SR servers. What I do now to get to the remote server is do a stop-m and enter needed network information. To then get to my local SR server I do "Clear Configuration" on the 270 and I get my local SR server. But to go back to the remote SR server I have to do stop-m and renter the network stuff from scratch. There must be a better way to move quickly back and forth between a locally attached SR server and a remote VPN connected SR server. Can anybody tell me what it is? Thanks, Mike _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
