Hi All,

Forgive the Newb here, I've just completed the installation of SRSS 4.0 on a Soalris 10 05/08 release system and the same was installed by a colleague on a Linux system. I've never worked with SRSS till this week. The two servers were running Solaris 9 and an older RedHat, with SRSS 2.0 installed. The original setup was used for a classroom of 30 SunRay 1's (which we are still using) to allow students to pick the OS they need for the class they are taking. The concept used to work in that the Server Selection provided a list of both servers for them to pick from. That is not the case with the new installation as the only server that is showing up is the Solaris Server, yet if we enter the Linux servers name in the selection box we can get to it. Further, at one point during this installation, the Web GUI Sun Ray Administrator did show both server. It no longer does that. Is SRSS able to do what I'm attempting to do (seems that is should be), adn can I get the Web Admin to see and work with both servers? Appreciate any help that you folks can muster.

As far as how we are configured goes, both servers were config'd using "utadm -A ###.###.###.0" and only the Solaris version is doing DHCP. The Solaris server has two NICs, one 100mb and one Fiber. The Linux only has GigE Copper. Both were configured to Broadcast.
Solaris Server:
==========
[server1/opt/SUNWut/sbin] utadm -l
LAN connections: On
Subnetwork: 130.203.70.0
       Netmask=        255.255.255.0
       Broadcast=      130.203.70.255
       Router=         130.203.70.1
       AuthSrvr=       130.203.70.19
       AltAuth=        130.203.70.19 130.203.70.17
       FirmwareSrvr=   130.203.70.19
       NewTver=        4.0_48_2007.08.01.15.48
       IP assignment=  30/40 (130.203.70.20)


Linux Server:
=========
[EMAIL PROTECTED] sbin]$ ./utadm -l
LAN connections: On
Subnetwork: 130.203.70.0
       Netmask=        255.255.255.0
       AuthSrvr=       130.203.70.19
       AltAuth=        130.203.70.19 130.203.70.17 255.255.255.255
       FirmwareSrvr=   130.203.70.19
       NewTver=        4.0_48_2007.08.01.15.48
       IP assignment=  0/1 ()

Both servers auth.props have these settings:
selectAtLogin=true
remoteSelect=true


Thanks in advance!!

--
Jeff Port - IT Support
Computer Science & Engineering Dept
111B Info. Sci. Tech. Bldg
University Park, PA 16802
Office: 814-865-1920
AIM: "Z Animul"

       ("`-''-/").___..--''"`-._
        `6_ 6  )   `-.  (     ).`-.__.`)       GO LIONS!!!
        (_Y_.)'  ._   )  `._ `. ``-..-'
      _..`--'_..-_/  /--'_.' ,'
     (il),-''  (li),'  ((!.-'
"UNIX *is* user friendly. It's just selective about who its friends are."

_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to