Jeff Port schrieb:
Forgive the Newb here, I've just completed the installation of SRSS 4.0 on a Soalris 10 05/08 release system and the same was installed by a colleague on a Linux system. I've never worked with SRSS till this week. The two servers were running Solaris 9 and an older RedHat, with SRSS 2.0 installed. The original setup was used for a classroom of 30 SunRay 1's (which we are still using) to allow students to pick the OS they need for the class they are taking. The concept used to work in that the Server Selection provided a list of both servers for them to pick from. That is not the case with the new installation as the only server that is showing up is the Solaris Server, yet if we enter the Linux servers name in the selection box we can get to it. Further, at one point during this installation, the Web GUI Sun Ray Administrator did show both server. It no longer does that. Is SRSS able to do what I'm attempting to do (seems that is should be), adn can I get the Web Admin to see and work with both servers? Appreciate any help that you folks can muster.
You need to make sure that these hosts are set up as one group, i.e. both of them must be configured with the same server group signature. If this was set up incorrectly in utconfig, then you can use utgroupsig(1M) to set the signature to the same value on both hosts.
- Joerg _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
