Thanks Loeki,
What is the platform of your sunray servers (sparc or x86 ?)
We insert:
xset +dpms
xset dpms 900 1080 1200
when try xset -q it shows :
Stanby: 900 Suspend: 1080 Off: 1200
DPMS is enabled
It works properly on SPARC servers, but not on X86 servers.
On Solaris X86 box: the monitor goes blank, but the backlight
is still ON (while the backlight is turned OFF if it connect
to sparc frontend server). I still have not figured out why.
These both have Solaris 10 5/08 and SRSS 4.1 and same level of patches,
the only difference is hardware (sparc vs. x86).
Any ideas how i can fix this problem? It was working
fine with SRSS 4.0 (i.e the backlight turn off after go blank).
Thanks,
-Giao
UBC Department of CPSC
> > The LCD's could go blank(after idle), but the
> > backlight is never turned off since we upgrade to SRSS 4.1
> > (from SRSS 4.0). We have SRSS 4.1 on Solaris 10 X86 (5/08)
> > as kiosk mode. Below is utxconfig and xset info, not sure
> > what to do to get DPMS enabled. I think DPMS is enable by
> > default in Xnewt server.
> > DPMS (Energy Star):
> > Standby: 1440 Suspend: 1620 Off: 1800
> > DPMS is disabled
> >
> >
> We are just inserting
> xset led 1 dpms 300 600 900 s blank s activate s 180
>
> at the start of our kiosk sessions
> read the man pages on it, amongst others it forces numlock on (expected and
> easy for Windows sessions), sets standby/suspend/'off' at 200/600/900
> seconds
>
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
