2009/2/11 Giao Huynh <[email protected]> > > Thanks Loeki, > What is the platform of your sunray servers (sparc or x86 ?) > > We insert: > xset +dpms > xset dpms 900 1080 1200 > > when try xset -q it shows : > > Stanby: 900 Suspend: 1080 Off: 1200 > DPMS is enabled > > It works properly on SPARC servers, but not on X86 servers. > On Solaris X86 box: the monitor goes blank, but the backlight > is still ON (while the backlight is turned OFF if it connect > to sparc frontend server). I still have not figured out why. > > These both have Solaris 10 5/08 and SRSS 4.1 and same level of patches, > the only difference is hardware (sparc vs. x86). > > Any ideas how i can fix this problem? It was working > fine with SRSS 4.0 (i.e the backlight turn off after go blank). > > Thanks, > > -Giao > > UBC Department of CPSC > > > > > > > The LCD's could go blank(after idle), but the > > > backlight is never turned off since we upgrade to SRSS 4.1 > > > (from SRSS 4.0). We have SRSS 4.1 on Solaris 10 X86 (5/08) > > > as kiosk mode. Below is utxconfig and xset info, not sure > > > what to do to get DPMS enabled. I think DPMS is enable by > > > default in Xnewt server. > > > > DPMS (Energy Star): > > > Standby: 1440 Suspend: 1620 Off: 1800 > > > DPMS is disabled > > > > > > > > We are just inserting > > xset led 1 dpms 300 600 900 s blank s activate s 180 > > > > at the start of our kiosk sessions > > read the man pages on it, amongst others it forces numlock on (expected > and > > easy for Windows sessions), sets standby/suspend/'off' at 200/600/900 > > seconds > > >
Giao, This was on both Solaris 10 10/08 x86 and CentOS 5.2 x64. It works pretty much identical. It works also identical for Sun Ray 270 and Sun Ray 2's connected to Sun 22" screens and some other 17" screens. The Suns are connected with a mix of VGA and DVI cables throughout, so no help there either.
_______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
