Which port on a Sun Ray 170. You need to use B.
Joseph Chiong wrote:
Dear all,
Did anyone has experience _random_ dropouts during serial printing via
UTTSC redirection? In my test, to print "ABC", the output can be "AC" or
"AB" or "ABC". I am clueless as how to troubleshoot this issue. Can
anyone help?
The serial setting is the default 9600/8/N/1. I have tested on Sun Ray 170
- UTTSC 2.0_23 (with patch 127556-03 installed), firmware
4.0_127553-05_2008.11.21, SRSS 4.0 with latest patches
- UTTSC 2.1_25 and firmware 4.1_139548-01_2008.12.08, SRSS 4.1 with
latest patches
Both version exhibited similar results with the former showing better
result.
Thanks.
--
Joseph Chiong
eSuria Mentari Systems Sdn Bhd
Unit 9, 1st Floor, Block A
Kiarong Complex
Bandar Seri Begawan BE1318
Brunei Darussalam
Ph: 673-2423721
Mobile: 673-8145285
Email: [email protected]
Web: http://www.esuria.com.bn
This email and any files transmitted with it are confidential and intended
solely for the use of individual or entity to whom they are addressed. If you
are not the named addressee you should not disseminate, distribute or copy this
e-mail. Please notify the sender immediately by e-mail if you have received
this email by mistake and delete this e-mail from your system.
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
