Hello All,
I have the following. I want to setup on a dedicated network.
When machine boots and separated from lan (no dhcp)
./utadm -a eth0
### Configuring /etc/nsswitch.conf
### Configuring Service information for Sun Ray
Interface "eth0" is already configured as
hostname "helios"
To configure eth0 as a dedicated interconnect:
remove the file /etc/opt/SUNWut/net/hostname.eth0 and
remove the host entry helios or use a different hostname.
Please use the -A option to configure support for shared networks.
Can't get this configured.
When I boot onto lan(w/dhcp)
./utadm -a eth0
### Configuring /etc/nsswitch.conf
### Configuring Service information for Sun Ray
### configuring eth0 interface at subnet 192.168.128.0
Selected values for interface "eth0"
host address: 192.168.128.1
net mask: 255.255.255.0
net address: 192.168.128.0
host name: helios-eth0.testray.org
net name: SunRay-eth0
first unit address: 192.168.128.16
last unit address: 192.168.128.240
auth server list: 192.168.128.1
firmware server: 192.168.128.1
router: 192.168.128.1
Accept as is? ([Y]/N): n
Everything else on the server looks to be ok.
Any thoughts? I need this on it's own network at the momemt.
M
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
