So here's the situation. I've got Sun VDI 3.0 running, providing virtual desktops to a bunch of sunrays. That's all working fine until I try to do two screens with a DVI to Cat5 connector.
So I've got a 20" widescreen connected to port 1 with a DVI cable running at 1680x1050, then a second display that's a 17" into port two with a dvi to cat5 connector (http://www.atlona.com/Atlona-1080p-DVI-Passive-Extender-over-Single-Cat5-up-to-100ft-NEW-p-17546.html), which needs to run at 1280x1024. It does not appear that I can set two different resolutions using the utresadm command. I tried to set it using utxconfig which sets the overall screen resolution. However this relies on DDC/EDID to be working correctly to detecting the display. So I get the correct overall resolution of 2960x1024 that I specify using utxconfig but the second display always wants to run at 640x480 so the picture on the 2nd display scrolls. I think the reason I'm having problems with the adapter is because it is sending the video over on Cat5e cable and does not send any of the DDC/EDID information and leaves it up to the OS/user to select the correct resolution. Do you know if it is possible to specify the resolution for the second display? Thanks
begin:vcard fn:Eric Toczek n:Toczek;Eric org:Delta Square Inc adr:;;1416 Sweet Home Rd, Suite 9B;Amherst;NY;14228;USA email;internet:[email protected] title:Sales Engineer tel;work:716-796-8297 note;quoted-printable:Vmware Certified Professional=0D=0A= Cisco Certified Network Associate=0D=0A= EMC Proven Professional - SE Accreditation=0D=0A= Symantec Technical Specialist - Backup Exec 12.5, Netbackup 6.5, Pure Dis= k 6.5 x-mozilla-html:FALSE url:http://www.deltasquare.com version:2.1 end:vcard
signature.asc
Description: OpenPGP digital signature
_______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
