Hi, I tried also the Srss 4.2 and still the same problem it seems that the uttsc is hanging when printing on the serial port, I tried also the rdesktop nothing changed.
Best Regards Mohamad Hammouda -----Original Message----- From: Mohamad Hammouda Sent: Tuesday, November 10, 2009 11:04 AM To: '[email protected]' Subject: Olivetti Printer via serial Cable Hi Guyz, I need your help in finding a solution for serial printer, on sunray. I am currently working on a project for a bank with 400 Seats using Sunray software 4.1 and Vmware, the customer has an Olivetti serial printer and I am trying to redirect it to the windows. I cannot use the printer redirection, since they have the core banking application that uses a serial port printer, it's a preconfigured. So instead of using the printer redirection I used Comport redirection using -r comport:com3=$UTDEVROOT /dev/term/a I configured the printer on windows it's an IBM Proprinter Xl emulation and connect it to COM3 on windows, I can print now but the problem is when I do print the uttsc command hangs and I can't do anything on the sunray ( Mouse, Keyboard input ..) until the print JOB is done, once the printing finish it backs to normal state and I can use again the windows session. I was able to do some tests, it appears that when using the windows printer spooler I get the problem, but when using for example DOS or windows CMD printing I don't have any problem and the Sunray works fine. I hope to hear from you soon. Best Regards Mohamad Hammouda System Engineer ACT (Automation And Computer Technologies) Gefinor Center - Block E - 1st floor Clemenceau Street - Hamra Beirut - Lebanon Phone: +961-1-350349 Fax: +961-1-345549 P.O.Box: 13-5302 Email: [email protected] _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
