Do you have a SunRayP8.MAC.parms file in /tfptboot? Can you provide the
contents?
If your Sun Ray is not getting DHCP help from the Sun Ray Server on your
subnet then the utadm -A command won't do much as it updates the DHCP
tables.
Also a utquery of the DTU would be great.
Peeler, Elliott wrote:
I’m sure I’m just leaving something off but….
Using srss 4.2 patched to 140993-01. My DTU is on a remote subnet with a
gui firmware from an earlier release. All parameters are hardcoded into
the gui for server, firmware server, logging server, DNS, IP address
etc. On the server I’ve run utadm –A <subnet> and utfwadm –A –e <dtuid>
-f <path to new gui firmware>. The DTU connects perfectly fine but no
firmware update happens. If I configure the entire subnet to use the gui
firmware and then run utfwload –L, my DTU gets the update as expected.
However, I don’t want every DTU on this subnet to have a GUI firmware on
it and I can’t get it to update the firmware without the utfwload –L
push. Barrier level doesn’t seem to be an issue as the DTU is reporting
a barrier level of 325 and the new firmware is 420. Unless I’m
misunderstanding how barrier level works, this looks okay. In any case,
using –F in the utfwadm command didn’t help.
Can a DTU using manually configured parameters get automatic firmware
updates?
Thanks.
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
