Hi Craig,
I was curious about the utadm -A in a situation where you're statically
configuring the DTU. Thanks for clarifying that. The .parms file for the
DTU is present in tftpboot, the contents are pasted below.
As Requested........
% ls /tftpboot | grep 00144F5748E5
SunRayP8.00144F5748E5
SunRayP8.00144F5748E5.parms
% cat /tftpboot/SunRayP8.00144F5748E5.parms
version=GUI4.2_140993-01_2010.01.21.17.35
revision=3
barrier=420
% utquery 192.168.206.10
terminalID=00144f5748e5
terminalIPA=192.168.206.10
model=SunRayP8
currentAuth=192.168.254.51
currentFW=GUI4.1_139548-01_2008.12.08.15.16
currentBarrier=325
currentBarrierLevel=325
currentMTU=1500
Subnet=255.255.255.0
Router=192.168.206.254
Broadcst=192.168.206.255
LogHost=192.168.254.51
FwSrvr=192.168.254.51
tftpSrvr=192.168.254.51
FWservType=conf
configMTU=1500
confNetType=Static
confIPA=192.168.206.10
confSubnet=255.255.255.0
confRouter=192.168.206.254
confBroadcst=192.168.206.255
confTftpSrvr=192.168.254.51
confLogHost=192.168.254.51
confServers=192.168.254.51
stopqon=0
bandwidth=100000000
% utfwload -a
3.0 ???? 192.168.206.10 P8.00144f5748e5
GUI4.1_139548-01_2008.12.08.15.16
% sudo utfwadm -P
System Version(P1) 4.2_140993-01_2010.01.21.17.35
Domain Intf Upgrade to
------------ ------ --------------------------
192.168.206.0 subnet 4.2_140993-01_2010.01.21.17.35
00144F5748E5 ether GUI4.2_140993-01_2010.01.21.17.35
========================================================================
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Craig Bender
Sent: Wednesday, May 26, 2010 5:35 PM
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] Automatic firmware upgrades not working
Do you have a SunRayP8.MAC.parms file in /tfptboot? Can you provide the
contents?
If your Sun Ray is not getting DHCP help from the Sun Ray Server on your
subnet then the utadm -A command won't do much as it updates the DHCP
tables.
Also a utquery of the DTU would be great.
Peeler, Elliott wrote:
> I'm sure I'm just leaving something off but....
>
>
>
> Using srss 4.2 patched to 140993-01. My DTU is on a remote subnet with
a
> gui firmware from an earlier release. All parameters are hardcoded
into
> the gui for server, firmware server, logging server, DNS, IP address
> etc. On the server I've run utadm -A <subnet> and utfwadm -A -e
<dtuid>
> -f <path to new gui firmware>. The DTU connects perfectly fine but no
> firmware update happens. If I configure the entire subnet to use the
gui
> firmware and then run utfwload -L, my DTU gets the update as expected.
> However, I don't want every DTU on this subnet to have a GUI firmware
on
> it and I can't get it to update the firmware without the utfwload -L
> push. Barrier level doesn't seem to be an issue as the DTU is
reporting
> a barrier level of 325 and the new firmware is 420. Unless I'm
> misunderstanding how barrier level works, this looks okay. In any
case,
> using -F in the utfwadm command didn't help.
>
>
>
> Can a DTU using manually configured parameters get automatic firmware
> updates?
>
>
>
> Thanks.
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
