Error codes over 128 are Solaris exit signals. You take the error code
and subtract 128 from it. This would give you an exit code of 13 which
is SIGPIPE.
Wondering if this is caused by MMR. Did you install the MMR components
on the terminal servers? MMR is not supported in a Session directory
environment. (CR 6739180) Thought if it is working from Linux, I'm
assuming it's the same terminal server.
Can you try turning off Sun MMR? with -M off option to uttsc. If you
are running on the correct version of Solaris, your DTU's are up to date
with the correct version of Firmware, I'd open a support case.
Matthew Arensberg Wieben wrote:
I put SRSS 5 on a Solaris 10 (sparc v440 all patched up, etc...) box to see if
Solaris exhibits any of the USB device mounting problems that we experienced
when running SRSS 4 and 5 under redhat EL5 with windows 2003 terminal servers.
Things were looking great and then I ran into a wall...
I'd like to know if anyone knows what "uttsc error code 141" is. The short
version of the problem is that when uttsc tries to redirect users to the correct terminal
server when using Session Directory, on this solaris box, I'm getting either:
1. a successful connection
2. the error 141 below
3. the proxy error below
kiosk:uttsc[1893]: [ID 702911 user.error] /opt/SUNWuttsc/bin/uttsc exited with
error code 141 - exiting
Sun Ray Connector proxy:[2960]: [ID 855542 user.error] Child closed socket
prematurely, session shutdown
...our redhat boxes connecting to these terminal servers don't have this
problem, they connect to the right terminal server in a second or two, the
solaris box takes about 20 seconds to connect and the uttsc-bin process jumps
up to 399M of memory used and 13% CPU while this is happening.
The only google hits regarding error 141 is back to sunray-users in a 2009
thread but regarding a different problem.
http://www.mail-archive.com/[email protected]/msg13378.html
I'm pretty stumped...I unfire-walled the windows and solaris box, played around
with the uttsc timeout values, turned on-off hotdesking options, still same
behavior: it works once, then fails repeatedly, then 15-30 minutes later it
works again.
Thanks,
Matt
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
