Ok, a new try, following the install instructions on the wiki. But it does not work.
I did a install of SunRay Server v5.1 on a fresh Solaris 11 Express, using "ipadm" to get static ip. But it behaves strangely. I get "44B" error messages, etc. So I want to try to make it right now. I try to get static ip with the old way; edit config files. Thus, I followed the instructions how to get static ip on the SunRay server wiki: I have followed the static IP instructions here: http://wiki.sun-rays.org/index.php/SRS_5.1_on_Solaris_11_Express#Solaris_11_Express_Installation.2FConfiguration_Instructions After following the instructions, I did this on my fresh S11E: /etc/hosts 127.0.0.1 localhost loghost 192.168.1.3 frasse /etc/hostname.e1000g0 frasse netmask + broadcast + /etc/netmasks 192.168.1.0 255.255.255.0 /etc/defaultrouter 192.168.1.1 # cp /etc/nsswitch.dns /etc/nsswitch.conf # svcadm disable network/physical:nwam # svcadm enable network/physical:default And this below output is the result. It does not look right. What is wrong? I dont get it. How do you get static IP on S11E? I have tried ipadm and succeeded with SunRay Server v5.1 install, but my SunRay2 DTU behaves strangely ("44B"), so I thought I try to get static IP as described in the install instructions (the legacy way, in the future we should use "ipadm"). But it does not work. Can someone update the wiki with install instructions for S11E? # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 # netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ---------- --------- 127.0.0.1 127.0.0.1 UH 2 4 lo0 Routing Table: IPv6 Destination/Mask Gateway Flags Ref Use If --------------------------- --------------------------- ----- --- ------- ----- ::1 ::1 UH 2 0 lo0 # arp -a # getent hosts frasse 192.168.1.3 frasse # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 e1000g0/_a static down 192.168.1.3/24 lo0/v6 static ok ::1/128 # ping 192.168.1.1 ping: sendto No route to host $ ipadm show-if IFNAME STATE CURRENT PERSISTENT lo0 ok -m-v------46 --- e1000g0 down bm--------4- --- $ ipadm show-ifprop IFNAME PROPERTY PROTO PERM CURRENT PERSISTENT DEFAULT POSSIBLE lo0 arp ipv4 rw on -- on on,off lo0 forwarding ipv4 rw off -- off on,off lo0 metric ipv4 rw 0 -- 0 -- lo0 mtu ipv4 rw 8232 -- 8232 68-8232 lo0 exchange_routes ipv4 rw on -- on on,off lo0 usesrc ipv4 rw none -- none -- lo0 forwarding ipv6 rw off -- off on,off lo0 metric ipv6 rw 0 -- 0 -- lo0 mtu ipv6 rw 8252 -- 8252 1280-8252 lo0 nud ipv6 rw on -- on on,off lo0 exchange_routes ipv6 rw on -- on on,off lo0 usesrc ipv6 rw none -- none -- e1000g0 arp ipv4 rw on -- on on,off e1000g0 forwarding ipv4 rw off -- off on,off e1000g0 metric ipv4 rw 0 -- 0 -- e1000g0 mtu ipv4 rw 1500 -- 1500 68-1500 e1000g0 exchange_routes ipv4 rw on -- on on,off e1000g0 usesrc ipv4 rw none -- none -- e1000g0 forwarding ipv6 rw -- -- off on,off e1000g0 metric ipv6 rw -- -- 0 -- e1000g0 mtu ipv6 rw -- -- -- -- e1000g0 nud ipv6 rw -- -- on on,off e1000g0 exchange_routes ipv6 rw -- -- on on,off e1000g0 usesrc ipv6 rw -- -- none -- _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
