Also, if the unit does have the firmware on it, you can also do the
following to enable the gui from a Sun Ray session as root (for a test)
utload -S <firmware server> -f SunRay.enableGUI
On 8/1/12 9:58 AM, Craig Bender wrote:
What command are you giving -G? -G force will enable the gui and you
should then see that referenced in the parms file
There is only one firmware image now, -G force flips the bit to turn it on.
On 8/1/12 9:29 AM, Tim Mulvaney wrote:
Hello, I am having some difficultly getting the configuration GUI
enabled on my Sun Ray 2-3004 clients. I am running three Sun Ray
Servers with version 5.2.5 installed, I've ran the utfwadm -AaV -G
prompt command on one of the Sun Ray Servers, I synced the clients by
using the utfwsync command, verified that all the clients received the
update (each client is now running firmware version
4.3_146928-05_2011.12.19.17.08) but Ctrl-Pause-S or Crtl-Pause-M does
not bring up the GUI. When I open the parms file on my Sun Ray Server,
there's no mention of gui-enabled. Am I missing something? Any advice
would be helpful. Thanks in advance.
-Tim
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
