Maybe that's my problem. I misunderstood the documentation. Here's the command I ran, "utfwadm -AaV -G prompt" From what you're saying I should use this "utfwadm -AaV -G force prompt" does that sound right? Thanks.
>>> Craig Bender <[email protected]> 8/1/2012 11:58 AM >>> What command are you giving -G? -G force will enable the gui and you should then see that referenced in the parms file There is only one firmware image now, -G force flips the bit to turn it on. On 8/1/12 9:29 AM, Tim Mulvaney wrote: > Hello, I am having some difficultly getting the configuration GUI > enabled on my Sun Ray 2-3004 clients. I am running three Sun Ray > Servers with version 5.2.5 installed, I've ran the utfwadm -AaV -G > prompt command on one of the Sun Ray Servers, I synced the clients by > using the utfwsync command, verified that all the clients received the > update (each client is now running firmware version > 4.3_146928-05_2011.12.19.17.08) but Ctrl-Pause-S or Crtl-Pause-M does > not bring up the GUI. When I open the parms file on my Sun Ray Server, > there's no mention of gui-enabled. Am I missing something? Any advice > would be helpful. Thanks in advance. > > -Tim > > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users > _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
