From: Jim Klimov <[email protected]>
>To: [email protected] 
>Sent: Thursday, April 25, 2013 11:30 AM
>Subject: Re: [SunRay-Users] Wrong Screen Size after firmware update to 11.1.1.0
> 
>
>On 2013-04-25 15:05, Christian Montero Hernández wrote:
>> Hello everyone,
>>
>> I was wondering if there is a default option for this firmware and
>> screens, because I have an Oracle VDI 3.4.1 deployment and I was using
>> firmware 11.0.x, but after some time considering an update I tried 1 Sun
>> Ray 3 with the new firmware and then that Sun Ray 3 always shows a
>> 1280x1024 resolution instead of the supported by the monitor 1024x768, I
>> have made a manual change to the screen size, but after a power cycle
>> the resolution comes back to 1280x1024.
>>
>> - Has anyone had this issue before?
>> - Why the change in behavior between firmware 11.0.x and 11.1.x?
>>
>> Thanks in advance for any tip you can give me.
>
>
>You could try utresadm to enforce particular resolution for a particular
>token (IEEE MAC address of the DTU). BTW, does this also happen if you
>first power on the display, and then power on (or powercycle) the DTU,
>that is, when the DTU should already know the display's best supported
>resolution? Does it happen or change with different display models?
>
>HTH,
>//Jim
>Hello Jim

Thank for your reply to my message, I have tried utresadm, but it works as long 
as I keep the session alive or the sun ray 3 is still powered on.
The display is always on, I never turn it off. (It just sleeps sometimes)

If I powercycle the sun ray 3 or if I, for some reason, unplug the power cord 
the resolution is back to 1280x1024.
I have just tried this one Sun Ray 3, I have 5 other Sun Ray 3 but those are in 
the warehouse. 
I just did another test with a different screen, this time it was a 15" wide, 
and the screen resolution was 1280x1024.

This afternoon I will try another Sun Ray 3 with those 2 screens and let you 
know if the behavior was the same or not.

Thanks for the help.

Best regards,

Christian Montero H.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to