Hi all,

 

I have been trying to install SRSS 5.4 on CentOS 6.4 for quite a while.

These are the major steps I have taken until now:

.         Patch and update system to latest kernel

.         Add Oracle Linux 6 repository

.         Replace gdm with gdm-multiseat

.         Download and unpack SRSS 5.4

.         Install Apache Tomcat and JRE provided in package

.         Install SRSS 5.4

.         Make a couple of changes to the scripts to get everything running

I should mention that we are using mostly SunRay 1 and 1G clients. I have
done the same installation on Solaris 11 SPARC and it went fine.

My configuration - ./utadm -l:

[root@coe30 sbin]# ./utadm -l
LAN connections: On
Use IPv4 multicast
Subnetwork: 192.168.248.0
    Netmask=    255.255.255.0
    Broadcast=    192.168.248.255
    Router=        192.168.248.30
    AuthSrvr=    192.168.248.30
    AltAuth=    192.168.248.30 
    FirmwareSrvr=    192.168.248.30
    NewTver=    11.1.1.0_06_2013.03.01.22.48
    IP assignment=    1/3 (192.168.248.245)

 

The issue is that the client gets stuck at 26D, but I do not think that the
authentication manager actually completes assigning a session. The  SunRay
goes from state 22D to state 26D and I can run ./utgstatus and ./utquery -d
<ip> and get correct information, but if I run ./utcapture I get
"Authentication Manager timed out". After this if I run ./utgstatus again I
get an error.

 

[root@coe30 sbin]# ./utgstatus
hostflags    interface     flags    interface     flags
            192.168.248.0/32       136.159.169.0/32   
--------    -------------------    -------------------
coe30 TN    192.168.248.30  UA-    136.159.169.90  UA-

[root@coe30 sbin]# ./utquery -d 192.168.248.245
terminalID=0003ba8b9498
        terminalIPA=192.168.248.245
        model=CoronaP7
        Subnet=255.255.255.0
        Router=192.168.248.30
        MTU=1500
        Broadcst=192.168.248.255
        LeaseTim=86400
        DHCPServer=192.168.248.30
        AuthSrvr=192.168.248.30
        AuthPort=7009
        LogHost=192.168.248.30
        FwSrvr=192.168.248.30
        NewTVer=11.1.1.0_06_2013.03.01.22.48
        FWservType=FWSrvr
        parmsVersion=_NONE_
        parmsBarrier=321
        configMTU=1500
        currentAuth=192.168.248.30
        currentFW=4.0_127553-03_2008.05.14.13.48
        currentBarrier=321
        currentBarrierLevel=321
        currentMTU=1500
        AltAuth=192.168.248.30
        confNetType=DHCP

 

This is the relevant part of the log, after I poll the authentication
manager I get the poll timed out error. There is nothing in auth_log.

 

May 22 14:58:49 coe30 dhcpd: DHCPDISCOVER from 00:03:ba:8b:94:98 via br0

May 22 14:58:50 coe30 dhcpd: DHCPOFFER on 192.168.248.245 to
00:03:ba:8b:94:98 via br0

May 22 14:58:50 coe30 dhcpd: DHCPREQUEST for 192.168.248.245
(192.168.248.30) from 00:03:ba:8b:94:98 via br0

May 22 14:58:50 coe30 dhcpd: DHCPACK on 192.168.248.245 to 00:03:ba:8b:94:98
via br0

May 22 14:58:54 coe30 utauthd: Worker7 NOTICE: whichServer
pseudo.0003ba8b9498: 

May 22 14:58:54 coe30 utauthd: Worker7 NOTICE: CLAIMED by StartSession.m4
NAME: pseudo.0003ba8b9498 PARAMETERS: {stealProtected=true,
terminalIPA=192.168.248.245, type=pseudo, fw=4.0_127553-03_2008.05.14.13.48,
state=disconnected, cause=insert, doamgh=true, barrierLevel=321,
lockaction=disconnect, rawId=0003ba8b9498, terminalCID=IEEE802.0003ba8b9498,
MTU=1500, tokenSeq=1, firstServer=c0a8f81e, namespace=IEEE802, ddcconfig=1,
clientRand=Lbv35/sWFXJQZSi6BuXKeQAxiKp7XYPVgLUUIrTzTh4, id=0003ba8b9498,
realIP=c0a8f8f5, startRes=1280x1024:1280x1024, useReal=true, event=insert,
sn=0003ba8b9498, rawType=pseudo, hw=SunRayP7, initState=1,
usersession=false, _=1}

May 22 14:58:54 coe30 utauthd: Worker7 NOTICE: CONNECT IEEE802.0003ba8b9498,
pseudo.0003ba8b9498, all connections allowed

May 22 14:58:54 coe30 utauthd: Worker7 NOTICE: MTU = 1500

May 22 14:58:54 coe30 utdtsession: Add (12,pseudo.0003ba8b9498,normal)

May 22 15:04:36 coe30 utguiauth: recv_namedpipe(): no message
received(Operation timed out)
May 22 15:07:14 coe30 utcapture: getAuthMgrRecords(): poll timed out
May 22 15:08:08 coe30 java: getAuthMgrRecords(): poll timed out
May 22 15:08:08 coe30 java: set_state(): failed to contact authd
(Authentication Manager timeout)
May 22 15:08:14 coe30 java: get_gstatus(): Poll timed out 

 

If you have any suggestions please share them. I am really at a standstill
with this issue. 

 

Thank you,

Andreea

 

 

 

_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to