Carlos wrote: > I'm sure this is one of those things that's been discussed, but I can't > remember the explanation. I am unable to get the E100 Ethernet port working > under OS8.6. It was fine in 8.1 which came with the Umax System CD. Is > there a way to get it working under 8.6 and 9.x (since I will probably be > going in that direction soon). I'm willing to perform a hack if necessary. > >
You do need the E100 extensions in your active System Folder. Just copy them from your previous install or the CD. I don't know if anybody has a mirror up of the old supermac ftp site, but if you can't locate them, I could email the last version to you. I believe that they are two extns and a cp for the uwscsi part of the card. As an E100 note to the list: I have built a RAID array which boots into 9.2.2 off of the E100 card with the jackhammer 1.4.5 firmware - the internal bus is all Linux - no other OS likes umax's proprietary E100 setup, so I'm assuming OSX will never support it. looking for a cheap aha-2940uw, tom -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
