Carlos wrote: > I believe I have all the necessary E100 drivers: " E100 Config" (first char > is a space) and "E100 Ethernet" extension, plus the "E100 SCSI" control > panel. The device shows up in the TCP/IP and Appletalk control panels, but > I get no hardware activity. > > Any more help?
There is an indicator led on the back of the card that should light and do various things to tell you what the hardware sees(eg 10bt or 100bt etc) unfortunately I don't recall what these are. Kennedy has the supermac insider site up, but not the knowledge base yet. If you have the original umax cd there should be a pdf on it detailing the troubleshooting of the e100. Those are the right extensions. Does your enet connection work with the built in 10bt port? -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
