You can use a PCI ethernet card just fine in the C600. The problem is more than likely that the guy installed a PC ethernet card instead of a Mac compatible. That or he forgot to load the drivers. I've never heard of OvisLink.
Using a CommSlot card just frees up your PCI slot. If you ever got around to installing a Firewire card and a USB card, those slots become precious. -Robyn On Sunday, February 23, 2003, at 09:08 AM, Jeffrey W. Roland wrote: > Hi, > > I'm trying to get started with a cable modem (Roadrunner), and the > tech who was here yesterday couldn't get my C600 (circa 1997 or so) > to "see" the PCI ethernet card he installed. The card is an OvisLink > 10/100 card, and it's in one of the three "normal" PCI slots, as > opposed to the Comm slot. He tried it in all three PCI slots, and > the machine never recognized it. Any ideas? Must an ethernet jack > on this machine be installed on a card in the Comm slot? > > TIA, > > Jeff -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
