On Tuesday, August 26, 2003, at 09:53 PM, <[EMAIL PROTECTED]> wrote:
I have an S900 system running OS 9.1. Until recently I had a FWB Jackhammer
SCSI card in slot 2, that worked fine with external drives, and internal
drives...
...So to get into the system I have to remove the card. I cannot boot with
the card installed so I cannot see hopw to get the card back to how it was if I
cannot start the machine with it installed.
If I cannot restore this card can anyone recommend a card that works well in an S900, and will work with OSX too!
Welcome to the club!
I had the same problem. After I intentionally flashed the card with the latest software the machine would not boot up no matter what I did so I couldn't even re-flash it. I had an Atto SW single channel card that worked well thru 9.2.2 but cannot be seen in Jaguar even after I flashed it with software to make it compatible with X.
I guess the only help this note can bring you is don't go for an Atto card either. Others on this list can tell you what works well with X. One solution is go for an IDE card. I have an ACARD AHARD PCI Ultra ATA/66 card with a WD Caviar ATA 80GB drive connected to it internally. Works great with Jaguar.
dan_A
-- SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
