I'm sure this has been discussed before, but I'm not finding what I need in
the archives.
I need to network my s900 to my C600. I hooked the C600 to a G4 tower by
running a cable
from the ethernet pci card in the c600 to the ethernet port in the G4. I assume that
this
can be done between my 900 and my 600 the same way, but it doesn't work. Neither
machine
shows up on the other. I assume that the ethernet card in the 900 is dead, since the
600
will hook to the G4.
Do only certain ethernet cards work with os10? Do some work with os10 and
os9? Are some
brands better than others? I assume I need a "crossover" cable to go directly from one
to
the other, right? I have a 10/100 hub made by DLink. I should be able to use regular
cables with it, right?
Any help you can give me here would be appreciated.
Mike
--
SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------
