on 9/13/04 5:48 PM, BigMomma at [EMAIL PROTECTED] wrote: > Hi Everyone. > I put a G3 300 in one of my S900 and it freezes during start up or > shortly thereafter. The heat sink-I think that is what it is- gets very > hot to the touch. Could it be that there is something missing or maybe > not enough of the grease between the processor and the top part? Is the > top part called the heat sink? When I remove the Zif carrier card and > put the original 250 unit back in it starts up fine. I have a 4 GB Hard > Drive, 168 megs of ram, the original CD unit, a USB card and OS9.1 Any > help would be greatly appreciated. > Many Thanks > Jacqueline >
How fast are you "pushing" it? The CPU may not like the bus speed or ratio it's running at. And the System software can't keep up. Jeff G -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
