Dear Salvador, Now once you have received the 103691A board you can install it inside the camera. Yoy have to unscrew the top metal cover from the camera and install the connectors of 103691A into the receptacles on the 10369 board - next to the big white connectors. Please see the camera assembly poster: http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353#NC353L_with_10369A_and_two_CF_cards and the camera assembly video: http://vimeo.com/4807283 on the 3rd minute it shows the installation of 103691A into 10369. Luckily it is one of the last steps of camera assembly, so you don't need to disassemble it too much - only take the top metal cover off.
Then you put in the CF card ( or 2 CF cards if you have 2) and try the camera with the CF cards installed before closing the metal top part. If everything works you can screw the top back on and enjoy recording to CF card; and if there is a problem - let us know. I hope everything is going to work. Best Regards, Olga _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
