Thnak you, Oleg. I will try that. Then, must we better consider FPSFLAGS param as deprecated?
2010/4/7 Oleg <andersonnotg...@gmail.com> > Dear Ángel, > > The easiest way is to put the sensor into the External Trigger Mode and use > the internal counter for trigger source. > http://192.168.0.9/parsedit.php -> External trigger controls, set > TRIG_PERIOD=<your_value> and TRIG=0x4. > > Best regards, > Oleg > > On 7 April 2010 10:24, Ángel <elphri...@gmail.com> wrote: > >> Hi, elphriends. >> >> How can I made the streamer run at, for example, 1 fps? >> >> I set FP1000SLIM=1000. >> >> With FPSFLAGS=0 the camera control interface shows 126.117 fps (green) >> With FPSFLAGS=1 shows 24.565 (green) >> With FPSFLAGS=2 shows 126.117 (green) >> With FPSFLAGS=3 shows 24.565 (green) >> >> This values apply for 640x480 but I have noted that the lower the frame >> size, the higher the minimum fps value I can achieve. >> >> Is it possible to force the streamer for running at low framerates? >> >> Thank you, >> >> Ángel. >> >> -- >> Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP >> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> > -- Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
