The FPSFLAGS & FP1000SLIM haven't been tested for some time - something could have broken - so I need to test it.
On 7 April 2010 15:51, Ángel <elphri...@gmail.com> wrote: > Thnak you, Oleg. I will try that. Then, must we better consider FPSFLAGS > param as deprecated? > > 2010/4/7 Oleg <andersonnotg...@gmail.com> > > Dear Ángel, >> >> The easiest way is to put the sensor into the External Trigger Mode and >> use the internal counter for trigger source. >> http://192.168.0.9/parsedit.php -> External trigger controls, set >> TRIG_PERIOD=<your_value> and TRIG=0x4. >> >> Best regards, >> Oleg >> >> On 7 April 2010 10:24, Ángel <elphri...@gmail.com> wrote: >> >>> Hi, elphriends. >>> >>> How can I made the streamer run at, for example, 1 fps? >>> >>> I set FP1000SLIM=1000. >>> >>> With FPSFLAGS=0 the camera control interface shows 126.117 fps (green) >>> With FPSFLAGS=1 shows 24.565 (green) >>> With FPSFLAGS=2 shows 126.117 (green) >>> With FPSFLAGS=3 shows 24.565 (green) >>> >>> This values apply for 640x480 but I have noted that the lower the frame >>> size, the higher the minimum fps value I can achieve. >>> >>> Is it possible to force the streamer for running at low framerates? >>> >>> Thank you, >>> >>> Ángel. >>> >>> -- >>> Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP >>> >>> _______________________________________________ >>> Support-list mailing list >>> Support-list@support.elphel.com >>> >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >>> >> > > > -- > Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
