Peter, that sequence is caused by a latency bug - camera driver relies on frame sync interrupts and initially internal generator is stopped, so it seems that switching (TRIG=4) happens before the generator gets programmed.
Next step - test the connector (with external it would be a connector with 2 jumpers 1-3 and 2-4 http://wiki.elphel.com/index.php?title=10369#J15_-_SYNC_.28external.29 Then open the page http://camera_ip/sync.php?role=detect&channel=external it should tell "role=master", w/o connector "role=slave" (for internal connectors it would be http://camera_ip/sync.php?role=detect&channel=internal) Andrey On Wed, May 12, 2010 at 4:23 PM, Peter Rakhunov <[email protected]>wrote: > Andrey, > > Correct if I do just those settings it doesn't freeze. > > Peter > > On Wed, May 12, 2010 at 5:19 PM, Andrey Filippov <[email protected]> > wrote: > > Peter, > > > > Does the camera work with internal trigger? > > > > 1) set TRIG_PERIOD= (124f800) > > and "apply" in parsedit.php (should be done before changing other > > parameters TRIG=4) > > 2) TRIG=4 > > EARLY_TIMESTAMP=1 > > TRIG_CONDITION = 0x0 > > > > Andrey > > > > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
