> > I am looking for variable framerate line-scan. maximum of 300fps should be > enough...
Michael, In that case running sensor in triggered mode should work, In a little while the FPGA/driver code should become stable again, now I'm working on it and there could be some glitches. The main problem is that the camera drivers are dependent on the frame interrupts (in linescan mode those interrupts come once per composite frame), and if for some reasons there are no sync pulses, it is getting stuck. So increasing VIRT_HEIGHT+setting VIRT_KEEP=1 should be safer as the frame sync pulses would not depend on other parameters. If you tried triggered mode - what exactly did you set up and what did niot work? I'll try to reproduce the same one on my camera Andey
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
